60000 MI or 96000 KM

Lubricate
    Wheel Hub
      Lubricate front hub needle bearings.
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate 4x4 front axle U-joints.
    Control Arm
      If using Special Operating Conditions I. Refer to Special Operating Conditions (Read This First). Lube front lower control arm and steering linkage ball joints with zerk fittings, if equipped.
Inspect
    Wheel Bearing
      Inspect wheel ends for endplay and noise.
    Vehicle
      Multi-Point Inspection
    Steering and Suspension
      Inspect steering linkage and suspension.
    Heat Shield, Exhaust
    Exhaust System
    Drive/Propeller Shaft
      If equipped.
    Cooling System
      Inspect cooling system and hoses.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses, and parking brake system for all operating Conditions.
    Ball Joint
Replace
    Spark Plug
      If using Special Operating Conditions I. Refer to Special Operating Conditions (Read This First). Replace spark plugs.
    Oil Filter, Engine
      Replace oil filter under all operating conditions.
    Fuel Filter
      Replace fuel filter. All Operating Conditions.
    Fluid - Transfer Case
      If using Special Operating Conditions T, I, D or O. Refer to Special Operating Conditions (Read This First). Replace transfer case fluid.
    Fluid - M/T
    Fluid - A/T
      Operating Conditions T, I, D and O only.
    Engine Oil
      Replace engine oil for all Special Operating Conditions.
    Cabin Air Filter / Purifier
      Replace cabin air filter, if equipped.
    Air Filter Element
Rotate
    Tires