Cylinder Head Assembly

LH cylinder head





Note: Do not Reuse Cylinder Head Bolts

Stage 1: Tighten the bolts to 40 Nm (30 ft.s.).
Stage 2: Tighten the bolts an additional 90 degrees.
Stage 3: Tighten the bolts an additional 90 degrees.

RH cylinder head

Note: Do not Reuse Cylinder Head Bolts





Stage 1: Tighten to 40 Nm (30 ft. lbs.).
Stage 2: Tighten an additional 90 degrees.
Stage 3: Tighten an additional 90 degrees.





Intake Manifold
Stage 1: Tighten to 2 Nm (18 inch lbs.).
Stage 2: Tighten to 25 Nm (18 ft. lbs.).





Camshaft bearing cap bolts 10 Nm (89 inch lbs.)





Exhaust manifold nuts 25 Nm (18 ft. lbs.)

Camshaft Sprocket
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
Stage 2: Tighten an additional 90 degrees.