Test A: Control Solenoids

PINPOINT TEST A: CONTROL SOLENOIDS

Test A1-A4:

Test A4-A8:

NOTE: Refer to the Transmission Vehicle Harness Connector illustration.

NOTE: Refer to the Internal Harness Connector illustration.

NOTE: Read and record all DTCs. All TR-P Sensor, PCA (line pressure solenoid) and VSS DTCs must be repaired before entering Output State Control (OSC) - Service Bay Mode.

NOTE: Use the PID Chart for available diagnostic PIDs. Refer to Output State Control (OSC) Mode. Scan Tool Testing and Procedures