Interior Rear View Mirror
INTERIOR REAR VIEW MIRRORInstaller, Rear View Mirror:
Special Tool(s)
Removal
All vehicles
1. If equipped, disconnect the electronic compass electrical connector and position the electronic compass sensor aside.
Vehicles equipped with standard mirror
2. Position the mirror in the full DOWN position. Grasp the mirror and rotate downward and toward the windshield until released from the mirror windshield bracket.
Vehicles equipped with auto-dimming mirror
3. Position the auto-dimming interior mirror outboard (toward the driver door) to its full extension.
4. Rotate the auto-dimming interior mirror back until it is parallel with the windshield. The auto-dimming interior mirror mount is now locked between the 2 adjustment balls and joints.
5. NOTE: It takes approximately 10 pounds of force to remove the interior mirror from the windshield bracket.
Hold the interior mirror firmly in 1 hand and strike the edge of the interior mirror with the palm of an open hand.
Installation
Vehicles equipped with standard mirror
1. Place the interior mirror on the windshield bracket. Using the special tool, press the mirror in place until fully seated.
Vehicles equipped with auto-dimming mirror
2. Seat the auto-dimming interior mirror base partially on the mounting button.
3. Position mirror bracket on mounting tab, then rotate the interior mirror fully up.
4. Slide the auto-dimming interior mirror base down on the mounting button until an audible click is heard.