Reverse Idler Gear
Reverse Idler GearDisassembly
1. Disassemble the reverse idler gear.
1 Remove the reverse idler gear retaining ring.
2 Remove the spacer.
3 Remove the reverse idler gear and bushing.
4 Remove the reverse idler gear bearing.
5 Remove the reverse idler gear thrust washer.
Assembly
1. Assemble the reverse idler gear.
1 Install the reverse idler gear thrust washer.
2 Install the reverse idler gear bearing.
3 Install the reverse idler gear and bushing.
4 Install the spacer.
5 Install the reverse idler gear retaining ring.
2. Measure reverse idler gear end play.
^ If end play is not within specifications, install a retaining ring of correct thickness.
^ Reverse idler gear retaining rings:
- 1.5 mm (0.0590 inch)
- 1.6 mm (0.0629 inch)
- 1.7 mm (0.0669 inch)
- 1.8 mm (0.0708 inch)
- 1.9 mm (0.0748 inch)