Cylinder Head Assembly

Cylinder Head





Tighten the bolts in 3 stages, RH shown, LH similar.
Stage 1 40 Nm (30 ft. lbs.)
Stage 2 Tighten an additional 90 degrees.
Stage 3 Tighten an additional 90 degrees.
Always use new Bolts

Intake Manifold





Tighten the intake manifold bolts 10 Nm (89 inch lbs.)

Camshaft Bearing Caps





Tighten the bolts 10 Nm (89 inch lbs.)

Camshaft Sprocket bolt in 2 stages:
Stage 1 40 Nm (30 ft. lbs.)
Stage 2 Tighten an additional 90 degrees

Exhaust Manifold - LH





Tighten the nuts 25 Nm (18 ft. lbs.)


Exhaust Manifold - RH