Test G: The Anti-Theft System Does Not Operate Correctly - PATS Transceiver Signal Is Not Received (Not Connected, Damaged Or

PINPOINT TEST G: THE ANTI-THEFT SYSTEM DOES NOT OPERATE CORRECTLY - PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER SIGNAL IS NOT RECEIVED (NOT CONNECTED, DAMAGED OR WIRING)

Test G1-G4:

Test G4-G6:

Test G6-G8:

Test G8-G10:

Test G10-G12:

Test G12-G13:

Normal Operation
During each vehicle start sequence, the transceiver module reads the PATS key identification code and circuit 1216 sends the data to the powertrain control module (PCM).

Possible Causes
- PATS transceiver
- PCM
- PATS key
- circuit 875 (BK/LB) open
- circuit 1215 (WH/LG) open or short to voltage
- circuit 1216 (GY/OG) open or short to voltage
- circuit 1266 (RD/YE) open