Rear Seat Backrest Cover

REAR SEAT BACKREST COVER

Removal and Installation
1. Remove the rear seat backrest.







2. Remove the head restraints (1 shown).
- Push the 2 release tabs and remove the head restraint.







3. NOTE:
- The inboard and outboard head restraint sleeves are not interchangeable.
- If necessary, install new head restraint sleeves.

Push the release tabs and pull the head restraint sleeves out of the frame tube (trim cover and foam pad removed for clarity).







4. Release the backrest J-clips.







5. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.

Separate the hook and loop fasteners.







6. Remove the hog rings and the backrest trim cover.
7. To install, reverse the removal procedure.