Oil Pump: Service and Repair

Oil Pump





Material

Removal
1. Remove the oil pan.
2. Remove the timing drive components.





3. Remove the 3 bolts and the oil pump.

Installation

1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.

Clean the sealing surfaces with metal surface prep. Follow the directions on the packaging. Inspect the mating surfaces.





2. Position the oil pump and install the bolts.
^ Tighten to 10 Nm (89 inch lbs.).
3. Install the timing drive components.
4. Install the oil pan.