Upfitter Relay Box
Upfitter Relay Box
Removal and Installation
1. Remove the upfitter switch.
2. Lower the glove compartment.
1. Open the glove compartment.
2. While releasing the glove compartment stops, lower the glove compartment.
3. Remove the 2 screws and position the uptitter relay box aside.
4. Release the 2 tabs and remove the upfitter relay box from the bracket.
5. Remove the instrument panel.
6. Remove the ground screw.
7. Release the wiring harness locators and remove the upfitter relay box.
8. To install, reverse the removal procedure.