Seal - Output Oil

Seal - Output Oil





Special Tool(s)





Material

Removal
All vehicles
1. Raise and support the vehicle.
2. Disconnect the rear driveshaft from the transmission and position it aside.

Vehicles with 4-wheel drive
3. Remove the transfer case.





4. Using the special tools, remove and discard the output oil seal.

Vehicles with 2-wheel drive





5. Using the special tools, remove the transmission flange.





6. Remove and discard the output oil seal.

Installation
Vehicles with 4-wheel drive





1. Using the special tool, install a new output oil seal. Coat the outer diameter of the new seal with gasket and trim adhesive.
2. Install the transfer case.

Vehicles with 2-wheel drive





3. Using the special tool, install a new output oil seal.
^ Coat the outer diameter of the new seal with gasket and trim adhesive.





4. Apply Threadlock 262 to the threads of the transmission flange locknut. Using the special tools, install the transmission flange. All vehicles
5. Connect the rear driveshaft.