Timing Components: Specifications

Engine Front Cover
Install the engine front cover and bolts.
Tighten to 24 Nm (18 ft. lbs.)





Crankshaft pulley (6.0L) (dual alternator) 47 Nm (35 ft. lbs.)





CAUTION: To prevent engine damage, you must always install four new bolts when installing the vibration damper.

NOTE: Do not use anti-seize compounds, grease, or any lubricants. Lubricants have an adverse effect on the torque results.

Install the crankshaft vibration damper and bolts.
Tighten the bolts in the sequence shown.
Tighten the bolts to 68 Nm (50 ft. lbs.).
Tighten the bolts an additional 90 degrees.