Front

Front Disc Brake
The brake caliper:
^ bolts to the brake caliper anchor plate, which bolts to the front wheel spindle.
^ is a dual piston, pin slider design.
^ has a fluid inlet at the center of the caliper housing.

The brake disc and bearing hub are the same part on 2-wheel drive vehicles.

The brake disc:
^ is a ventilated full-cast design, with non-directional cooling fins.
^ is mounted to the wheel spindle.
^ is serviced with the brake caliper and brake caliper anchor plate removed as an assembly.
^ is part of the bearing hub on 2-wheel drive vehicles.

The brake disc shield:
^ is bolted to the front wheel spindle.
^ protects the wheel bearings and inboard surface of the brake disc.

The brake pads:
^ are housed in the brake caliper anchor plate.
^ are of a non-asbestos, semi-metallic composition.