Clutch Pressure Plate Locating Dowels

Clutch Pressure Plate Locating Dowels
Removal





1. CAUTION: Do not damage the bore or the surrounding surface area.

When installed in an open hole, use a drift to remove the dowel. When installed in a blind hole, use locking pliers to remove the dowel. There are two dowels on the diesel engine flywheel, and three dowels on the gasoline engine flywheel.

Installation

1. CAUTION: Do not damage the bore or the surrounding surface area.

Using a brass or plastic mallet, drive the dowels squarely into place until fully seated in the bore.