Radiator Grille Support
RADIATOR GRILLE SUPPORTRemoval and Installation
All vehicles
1. Raise the hood (16612).
2. Remove the upper radiator air deflector.
3. Remove the grille opening panel reinforcement.
4. Remove the radiator support bracket retaining bolts.
5. Remove the jack handle wing nut.
6. Remove the coolant reservoir retaining bolt.
7. Remove the three right side air deflector pushpins.
Diesel only
8. Remove the air charge cooler retainers (LH retainer shown, RH similar).
9. Disconnect the left side battery cable from the radiator grille support.
All vehicles
10. Remove the hood release.
Gasoline only
11. Remove the air cleaner bracket retaining bolts.
- Remove the top bracket retaining bolts.
- Remove the bottom bracket retaining bolts.
12. NOTE: Left side shown, right side similar.
Remove the two air deflector pin-type retainers on the back of the radiator support.
All vehicles
13. Remove the radiator support bracket retaining bolts (six on each side).
14. Remove the upper radiator support.
15. To install, reverse the removal procedure.