90000 MI or 144000 KM

Lubricate
    Wheel Bearing
      Special Operating Conditions "T", "I" & "O" Lubricate 4x2 and 4X4 wheel bearings, replace grease seals, and adjust bearings (if not sealed bearings).
    Control Arm
      If using Special Operating Conditions I. Refer to Special Operating Conditions (Read This First). Lube front lower control arm and steering linkage ball joints with zerk fittings, if equipped.
Inspect
    Vehicle
      Multi-Point Inspection
    Steering and Suspension
      Inspect steering linkage and suspension.
    Heat Shield, Exhaust
    Exhaust System
    Drive/Propeller Shaft
      If equipped.
    Cooling System
      Inspect cooling system and hoses.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses, and parking brake system for all operating Conditions.
    Ball Joint
      Inspect and lubricate 4x2 ball joints.
Replace
    Oil Filter, Engine
      Replace oil filter under all operating conditions.
    Fuel Filter
      Replace fuel filter. All Operating Conditions.
    Fluid - A/T
      Operating Conditions T, I, D and O only.
    Engine Oil
      Replace engine oil for all Special Operating Conditions.
    Cabin Air Filter / Purifier
      Replace cabin air filter, if equipped.
    Air Filter Element
Rotate
    Tires