With Hard DTCs/ Lamp Fault Codes

DIAGNOSING CUSTOMER CONCERNS WITH HARD DTCs

Most Supplemental Restraint System (SRS) diagnostic procedures will require deactivation and reactivation or depowering and repowering of the system. Deactivation and reactivation requires the disconnection of most SRS components and the installation of restraint system diagnostic tools. Depowering and repowering requires disconnecting of the battery and removal of the restraints control module (RCM) fuse. This reduces the risk of inadvertent deployment of SRS components while diagnostic procedures are being carried out.

Restraint system diagnostic tools are required for the diagnosis and testing of the SRS. It is not acceptable to short-circuit the air bag module connections with a jumper wire. If a jumper wire is used to short-circuit the air bag module connections, a lamp fault code (LFC) will be displayed.