Transmission Support Crossmember

Transmission Support Crossmember

Removal

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Install a suitable high-lift transmission jack.






3. Remove the wire harness from the rear crossmember.






4. Remove the rear transmission mount nuts.






5. Remove the LH crossmember bolts and nuts.
1. Loosen, but do not remove, the bolt and nut indicated.






6. Remove the RH crossmember bracket bolts and nuts.
1. Remove the bracket bolts and nuts.
2. Remove the bracket.






7. Remove the RH crossmember bolts and nuts.






8. Remove the LH crossmember bolt, nut and the crossmember.
1. Remove the bolt and nut
2. Remove the crossmember.

Installation






1. Position the crossmember to the transmission mount and loosely install the nut.






2. Install the LH crossmember bolts.






3. Install the RH crossmember bolts.






4. Install the bracket and loosely install the bolts.
1. Install the bracket.
2. Loosely install the bolts.






5. Tighten the RH crossmember bolts.






6. Tighten the rear insulator nuts.






7. Connect the wire harness to the rear of the crossmember.