Upfitter Switch

Upfitter Switch

Removal and Installation

All vehicles

1. Disconnect the battery.
2. Remove the instrument panel center finish panel. Vehicles with trailer brakes
3. Using a suitable tool, press the retaining tab at the top and remove the trailer brake controller module.

1. Press the retaining tab.
2. Remove the trailer brake controller module.






Vehicles without trailer brakes

4. Using a suitable tool, press the 4 retaining tabs and remove the storage bin.

1. Press the 4 retaining tabs.
2. Remove the storage bin.






All vehicles

5. Using a suitable tool, press the 4 retaining tabs and remove the upfitter switch.

1. Press the 4 retaining tabs.
2. Remove the upfitter switch.






6. To install, reverse the removal procedure.