Timing Components: Specifications

Engine front cover

Tighten the fasteners in sequence in 2 stages.
Stage 1: Tighten fasteners 1 through 15 to 25 Nm (18 ft. lbs.).
Stage 2: Tighten fasteners 6 and 7 to 48 Nm (35 ft. lbs.).





Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
Stage 1: Tighten to 20 Nm (15 ft. lbs.).
Stage 2: Tighten an additional 60 degrees.





Crankshaft Pulley

Tighten the bolt in 4 stages.
Stage 1: Tighten to 90 Nm (66 ft. lbs.).
Stage 2: Loosen 360 degrees.
Stage 3: Tighten to 50 Nm (37 ft. lbs.).
Stage 4: Tighten an additional 90 degrees.