Roof Opening Panel

ROOF OPENING PANEL

Removal and Installation

NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed, or when a new roof opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization. Roof Opening Panel Motor Initialization

1. Position the roof opening panel in the vent position.







2. Remove the four roof opening panel bolts.







3. Remove the roof opening panel from the outside of the vehicle by lifting up and out.
4. To install, reverse the removal procedure.
- Adjust the roof opening panel.