System Specifications

FRONT AXLE LUBRICANT CAPACITY

DANA Super 60 3.02 Liters (6.38 pints)

REAR AXLE LUBRICANT CAPACITY

Dana 80

Conventional and Truetrac 4.0 Liters (8.5 pints)
Trac-Lok* 3.8 Liters (8.0 pints)

*First fill the axle with 0.2365 liters (0.5 pints) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A.

Dana S110 and S130

Capacity 6.6 Liters (14 pints)*

*The lubricant capacity will vary depending upon the housing mounting angle. The capacity given is for an angle of 4 degrees. A lubricant level close enough to the bottom of the fill hole to be seen or touched is not sufficient. The lubricant must be level with the fill hole.


Ford 10.50-inch Ring Gear

10.50 Inch Axle (1) 3.3 Liters (6.9 pints)

(1) Add 8 oz. (236 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118A for complete refill of limited slip Ford axles. Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle has been submerged in water.