Roof Opening Panel Shield
ROOF OPENING PANEL SHIELDRemoval and Installation
NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed, or when a new roof opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization. Roof Opening Panel Motor Initialization
1. Remove the roof opening panel.
2. Remove the water trough.
1 Remove the bolts.
2 Remove the water trough.
3. Flex the opening shield to remove the guides from the tracks and remove the roof opening panel shield.
4. To install, reverse the removal procedure.