Rear Seat - 60/40, Crew Cab

REAR SEAT - 60/40, CREW CAB

Removal and Installation

NOTE: New retaining bolts must be installed, do not reuse the bolts that were removed. The retaining stud and nut can be reused.







1. Remove and discard the rear seat load floor-to-floor retaining bolt.







2. Remove the six load floor bolts and remove the load floor assembly.







3. Remove and discard the left seat riser-to-floor retaining bolt.







4. Remove and discard the two right seat riser-to-floor retaining bolts.







5. Remove the right rear seat riser-to-floor retaining nut and bolt.







6. Remove the left rear seat riser-to-floor retaining nut.

7. NOTE: Removing the rear seat requires more than one technician.

Remove the 60/40 rear seat assembly.

8. To install, reverse the removal procedure.
9. Check the active restraint system for correct operation.