Front Door Window Regulator: Service and Repair
FRONT DOOR WINDOW REGULATOR AND MOTORSpecial Tool(s):
Special Tool(s)
Removal and Installation
1. Remove the front door window glass.
2. If equipped, remove the window regulator motor.
3. Using a drift, carefully remove the center pins from the rivets.
4. NOTE: Avoid enlarging the sheet metal holes in the door inner panel.
Using a 1/4-inch diameter drill, drill out the rivets attaching the window regulator lower bracket to the inner panel.
5. Remove the upper bracket nuts.
- To install, tighten to 14 Nm (10 lb-ft).
6. Remove the window regulator.
7. To install, reverse the removal procedure.