Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a sensor. hoist.





2. Disconnect the output shaft speed (OSS) sensor.





3. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of debris to prevent contamination of the transmission.

Remove the OSS sensor.
1 Remove the bolt.
2 Remove the OSS sensor.

Installation





1. Install the OSS sensor.
1 Lubricate the O-ring and install the OSS sensor.
2 Install the bolt.
^ Tighten to 9 Nm (80 inch lbs.).





2. Connect the OSS sensor electrical connector.