Test J: The Wipers Do Not Park In the Correct Position - Front

PINPOINT TEST J: THE WIPERS DO NOT PARK IN THE CORRECT POSITION - FRONT

J1-J3:

Normal Operation
The multifunction switch receives power through circuit 950 (WH/BK). The windshield wiper motor receives power from the multifunction switch through circuit 28 (BK/PK) for low or intermittent speed and through circuit 56 (DB/OG) for high speed. The windshield wiper motor also receives power from the SJB fuse 25 (20A) through circuit 941 (BK/WH) for park. A return is supplied back to the multifunction switch from the windshield wiper motor through circuit 65 (DG). The windshield wiper motor and the multifunction switch are grounded through circuit 57 (BK).

Possible Causes
- Circuit 65 (DG) open or short to ground
- Circuit 941 (BK/WH) open
- Windshield wiper motor
- Multifunction switch