Motor Electronics Cooler

Motor Electronics Cooler

Motor Electronics Cooler:

1. Drain the motor electronics cooling system (MECS). For additional information, refer to Motor Electronics Cooling System Draining and Filling. Procedures

2. Remove the front bumper cover.

3. Loosen the hose clamp and disconnect the MECS radiator inlet hose.






4. Loosen the hose clamp and disconnect the MECS radiator outlet hose.






5. NOTE: RH shown, LH similar.

Remove the MECS radiator bolts.
^ To install, tighten to 6 Nm (53 lb-in).






6. To install, reverse the removal procedure.