Transfer Case - Automatic Transaxle
Transfer Case - Automatic TransaxleMaterial:
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery.
3. Drain the transfer case.
4. CAUTION: A new transfer case inner halfshaft seal must be installed whenever the intermediate shaft or transfer case is removed from the vehicle.
Remove the front RH intermediate shaft.
5. Remove the driveshaft.
6. Remove the 4 bolts and the crossmember brace.
7. Remove the generator.
8. Remove the exhaust as required.
9. Remove the 3 transfer case beat shield bolts and the transfer case heat shield.
10. Remove the transfer case-to-engine brace.
11. Disconnect the transfer case vent hose and position it aside.
12. Remove the 4 transfer case-to-transaxle bolts.
13. Remove the transfer case.