Oil Cooler: Service and Repair

Oil Cooler

Oil Cooler:

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove and discard the oil filter.
^ To install, tighten to 13 Nm (10 ft. lbs.).

4. Disconnect the oil cooler inlet hose from the oil cooler.
5. Disconnect the heater hose from the oil cooler.
6. Loosen the threaded insert and remove the oil cooler.
^ To install, tighten to 57 Nm (42 ft. lbs.).

7. To install, reverse the removal procedure.
^ Install a new oil filter.
^ Check the engine oil and fill as necessary.