Front Door Window Regulator: Service and Repair

FRONT DOOR WINDOW REGULATOR






Removal and Installation
1. Remove the front door trim panel.
2. Remove the front door speaker.
3. Remove the interior moulding.
4. Remove the front door weather shield.

5. NOTE: Some vehicles may use rivets to attach the window glass to the window regulator assembly.

Remove the 2 front door window glass-to-regulator bolts.
- Position the front door window glass as necessary to access the front door window glass-to-regulator bolts.
- To install, tighten to 7 Nm (62 lb-in).







6. Secure the front door glass in the full UP position with tape.
7. Disconnect the window regulator motor electrical connector.
8. Remove the 4 window regulator assembly nuts.
- To install, tighten to 10 Nm (89 lb-in).

9. Remove the window regulator assembly.
10. To install, reverse the removal procedure.