Floor Console - Front

FLOOR CONSOLE - FRONT







Removal and Installation







1. Remove the pin-type retainer and release the 2 floor console front clips.
2. Remove the floor console trim ring.
3. Remove the front floor console center finish panel.
- Remove the screws and remove the center finish panel.
- Disconnect the power point electrical connector.

4. Remove the 2 front floor console forward bolts.

5. NOTE: Position both front seats in the full REARWARD position.

Remove the 2 front floor console middle bolts.

6. NOTE: Position both front seats in the full FORWARD position.

Remove the 2 front floor console rear bolts.

7. Remove the front floor console.
8. To install, reverse the removal procedure.