After on-Board Diagnostic

After On-Board Diagnostic

NOTE: The vehicle wiring harness, PCM and non-transmission sensors may affect transmission operations. Repair these concerns first.

After the on-board diagnostic procedures are completed, repair all DTCs. Begin with non-transmission related DTCs, then repair any transmission related DTCs. Use the DTC chart for information on conditions and symptoms. This chart will be helpful in referring to the correct information and aids in diagnosing internal transmission concerns and external non-transmission inputs. The pinpoint tests are used in diagnosing transmission electrical concerns. Make sure that the vehicle wiring harness and the PCM are diagnosed as well. Computers and Control Systems will aid in diagnosing non-transmission electronic components.