Wiper Motor: Service and Repair

WIPER MOTOR

Removal and Installation
1. Remove the windshield wiper pivot arms.
2. Remove the cowl top vent panels.







3. Disconnect the windshield wiper mounting arm and pivot shaft.
1 Remove the access cover from the dash panel.
2 Remove the retaining clip.
3 Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.







4. Remove the windshield wiper motor.
1 Disconnect the electrical connector.
2 Remove the 3 bolts.
- To install, tighten to 4 Nm (35 lb-in).

3 Remove the windshield wiper motor.

5. To install, reverse the removal procedure.