Front Fender: Service and Repair

FENDER - FRONT












Exploded View

Removal and Installation
1. Remove the radiator grille opening panel reinforcement.







2. Remove the splash shield screws at the lower edge of the front fender securing the splash shield.







3. With the front door open, remove the fender-to-cowl side bracket bolts, and the lower fender bolt and shims securing the lower rear of the fender.
- To install, tighten to 11 Nm (8 lb-ft).







4. Remove the front fender-to-radiator support screw and the 2 front fender-to-front end stone deflector screws.
- To install, tighten to 11 Nm (8 lb-ft).







5. Remove the front fender-to-upper apron screws, then the front fender.
- To install, tighten to 11 Nm (8 lb-ft).

6. To install, reverse the removal procedure.