A-Pillar Trim Panel

A-PILLAR TRIM PANEL












Exploded View


Removal and Installation

NOTE: Right side shown, left side similar.







1. Remove the right front assist handle covers.







2. Remove the assist handle.
- Remove the 2 assist handle bolts and remove the assist handle.
- To install, tighten to 12 Nm (9 lb-ft).







3. NOTE: To release upper retaining clip, pull down at the top of the A-pillar trim panel.

Pull the A-pillar trim panel downward to release the remaining clips.

4. To install, reverse the removal procedure.