Instrument Cluster (IC)

INSTRUMENT CLUSTER







Removal and Installation

1. NOTE: Prior to removal of the instrument cluster, it is necessary to upload the instrument cluster configuration information to the scan tool. Programming and Relearning

Depower the supplemental restraint system (SRS).

2. Remove the instrument panel finish panel.
3. Remove the 4 screws and position the instrument cluster away from the instrument panel.
- Disconnect the electrical connectors.

4. Disconnect the transmission range indicator and remove the instrument cluster.
5. To install, reverse the removal procedure.
- Download the instrument cluster configuration information from the scan tool to the new instrument cluster.