Parking Assist Distance Sensor: Service and Repair

PARKING AID SENSOR

Special Tool(s):

Special Tool(s)

Standard Bumper:

Removal and Installation

NOTE: Right outer and right inner parking aid sensors shown, left outer and left inner similar.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the parking aid sensor electrical connector.
3. Remove the parking aid sensor(s).
- Press the parking aid sensor retaining tabs to release the sensor(s).

4. To install, reverse the removal procedure.
- Using the scan tool, verify that the parking aid sensor distance PIDs read no object present, and that the parking aid sensor attenuation PIDs read between 0.8 - 1.6 ms. If the parking aid sensor attenuation PIDs do not read between 0.8 - 1.6 ms, the paint is too thick on the sensor(s) and it will be necessary to repaint the sensor(s) as required.