Reading and Clearing Diagnostic Trouble Codes

INSTRUMENT CLUSTER DEALER TEST MODE

Instrument Cluster Dealer Test Mode (Part 1):

Instrument Cluster Dealer Test Mode (Part 2):

Instrument Cluster Dealer Test Mode (Part 3):

To enter the instrument cluster dealer test mode, press and hold the instrument cluster SELECT/RESET button, then turn the ignition switch to the RUN position. Continue pressing the SELECT/RESET button (5 seconds) until TEST is displayed in the odometer. The SELECT/RESET button must be released within 5 seconds of the odometer displaying TEST to begin the dealer test mode. Press the SELECT/RESET button to advance through the following steps until the DTC is displayed. Pressing the SELECT/RESET button repeatedly displays all continuous DTCs stored before proceeding to the next step.

Turn the ignition switch to the OFF position to exit instrument cluster dealer test mode.