Radiator Grille Support

RADIATOR GRILLE SUPPORT

Removal and Installation
1. Remove the radiator grille opening panel reinforcement.
2. Position aside the upper air deflector.







3. Remove the transmission oil cooler.
1. Disconnect and plug the transmission oil cooler hoses.
2. Remove the transmission oil cooler screws, then the transmission oil cooler.
- To install, tighten to 6 Nm (53 lb-in).







4. Remove the power steering fluid cooler bolts and position the power steering fluid cooler aside.
- To install, tighten to 11 Nm (8 lb-ft).







5. Remove the 4 radiator grille support screws and the radiator grille supports.
- To install, tighten to 10 Nm (89 lb-in).

6. To install, reverse the removal procedure.