Brake Pedal Assy: Service and Repair
Brake Pedal and BracketBrake Pedal and Bracket:
Removal and Installation
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Release the fuse block assembly from the brake pedal bracket and position aside.
3. Disconnect the brake booster push rod.
^ Remove the brake pedal cotter pin cover.
^ Remove the brake pedal cotter pin.
^ Remove the stoplamp switch.
^ Remove the brake booster push rod bushing.
^ Disconnect the brake booster push rod from the brake pedal pin.
4. Remove the 2 brake pedal bracket nuts.
^ To install, tighten to 25 Nm (18 ft. lbs).
5. Remove the 4 brake booster nuts.
^ To install, tighten to 25 Nm (18 ft. lbs).
6. Remove the brake pedal and bracket assembly.
7. To install, reverse the removal procedure.