Transmission Filler Tube

Transmission Filler Tube

Removal
1. Remove the engine cover. For additional information, refer to Trim Panel.
2. Remove the fluid level indicator.





3. Remove the transmission fluid filler tube nut at the cylinder head.





4. Remove the transmission filler tube nut at the intake manifold.





5. Remove the transmission fluid filler tube.





6. Inspect the O-ring seal for damage.





Installation
1. Install a new O-ring if damaged.





2. NOTE: Coat the O-ring at the bottom of the transmission fluid filler tube with transmission fluid.

Install the transmission fluid filler tube.





3. Install the transmission fluid filler tube nut on the cylinder head.
^ For 5.4L engines, tighten to 10 Nm (89 inch lbs.)
^ For 6.8L engines, tighten to 28 Nm (21 ft. lbs.).
^ For 6.0L engines, tighten to 8 Nm (71 inch lbs.).





4. Install the transmission filter tube vent on the intake manifold.
^ For 5.4L and 6.8L engines, tighten to 10 Nm (89 inch lbs.)
^ For 6.0L engines, tighten to 13 Nm (10 ft. lbs.)
5. Install the fluid level indicator.





6. Install the engine cover.