Wiper Mounting Arm and Pivot Shaft

WIPER MOUNTING ARM AND PIVOT SHAFT

Removal and Installation

1. NOTE: The windshield wiper mounting arm and pivot shaft is installed as an assembly.

Remove the windshield wiper pivot arms.

2. Remove the cowl top vent panels.







3. Disconnect the windshield wiper mounting arm and pivot shaft.
1 Remove the access cover from the dash panel.
2 Remove the retaining clip.
3 Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.







4. Remove the windshield wiper mounting arm and pivot shaft.
1 Remove the screws.
- To install, tighten to 9 Nm (80 lb-in).

2 Remove the windshield wiper mounting arm and pivot shaft.

5. To install, reverse the removal procedure.