Speaker Walk-Around Test (ULC and M100 Audio Units)

SPEAKER WALK-AROUND TEST (ULC AND M100 AUDIO UNITS)

NOTE: The audio unit must be turned on and in radio tuner mode (AM/FM) to enter the speaker walk-around test.

1. To enter the speaker walk-around test, press preset buttons 3 and 6 simultaneously and hold for 3 seconds, then release.
2. The speaker walk-around test applies sound to each speaker for 1-2 seconds. Each speaker is tested and shown on the display in the following sequence: RF, LF, LR, RR.
3. To exit the speaker walk-around test, turn the ignition switch to OFF, or turn the audio unit off.