Autolock and Horn Chirp Programming
AUTO LOCK AND HORN CHIRP PROGRAMMINGEnable Using the Ignition Lock Cylinder
NOTE: The auto lock feature is not available on vehicles equipped with manual transmissions.
1. Close all the doors.
2. Confirm that the ignition switch is in the OFF position.
3. Turn the ignition switch from OFF to ON.
4. NOTE: Steps 4 through 8 must be carried out within 30 seconds.
Press the door lock control switch UNLOCK button 3 times.
5. Turn the ignition switch from ON to OFF.
6. Press the door lock control switch UNLOCK button 3 times.
7. Turn the ignition switch from OFF to ON.
8. Press the door lock control switch UNLOCK button, then the LOCK button.
9. Verify the horn chirps 1 time, followed by a long chirp of the horn. The autolock/relock feature has been enabled.
10. Turn the ignition switch to the OFF position to exit the enable/disable mode.
Disable Using the Ignition Lock Cylinder
NOTE: The autolock feature is not available on vehicles equipped with manual transmissions.
1. Close all the doors.
2. Confirm that the ignition switch is in the OFF position.
3. Turn the ignition switch from OFF to ON.
4. NOTE: Steps 4 through 8 must be carried out within 30 seconds.
Press the door lock control switch UNLOCK button 3 times.
5. Turn the ignition switch from ON to OFF.
6. Press the door lock control switch UNLOCK button 3 times.
7. Turn the ignition switch from OFF to ON.
8. Press the door lock control switch UNLOCK button, then the LOCK button.
9. Verify the horn chirps 1 time. The autolock/relock feature has been disabled.
10. Turn the ignition switch to the OFF position to exit the enable/disable mode.