Crankshaft Main Bearing
CrankshaftMain bearing bore inside diameter 85.99-86.01 mm (3.3854-3.3862 inch)
Main bearing journal
Diameter
Standard size 80.9873-81.0127 mm (3.188-3.150 inch)
0.254 mm (0.010 inch) undersize 80.7333-80.7587 mm (3.178-3.140 inch)
0.508 mm (0.020 inch) undersize 80.4793-80.5047 mm (3.168-3.130 inch)
0.762 mm (0.030 inch) undersize 80.2253-80.2507 mm (3.158-3.120 inch)
Journal-to-cylinder block clearance 0.020-0.086 mm (0.008-0.0034 inch)
Crankcase Main Bearing Mounting Bolts
Make sure that the longer main cap bolts (M14 x 2 x 127) are installed inboard and the shorter bolts (M14 x 2 x 114) are installed outboard.
First pass 122 Nm (90 ft. lbs).
Second pass 163 Nm (120 ft. lbs).
Final pass 231 Nm (170 ft. lbs).