Seat - Second Row, Bucket

Seat - Second Row, Bucket

Removal and Installation

NOTE: The rear quad bucket seats are not interchangeable. The seat with the adjustable seat track goes on the RH side of the vehicle.







1. Insert an appropriate tool into the slot in the detachable anchor and lift upward, disengaging the detachable anchor tongue from the detachable anchor.







2. Pull the handle to release the rear quad bucket seat from the seat mounting bracket.







3. Slide the seat toward the RH side of the vehicle, disengage the 4 pins and the latch rod hook end in the seat support from the 5 holes in the seat mounting bracket and remove the seat.

4. To install, reverse the removal procedure.
- Make sure the 4 pins and the latch rod hook end are completely engaged and locked into the seat mounting bracket.
- Make sure the safety belt is not twisted before installing the detachable anchor tongue to the detachable anchor.
- Make sure the safety belts and buckles are accessible to the occupants after installation.