Window Glass: Adjustments

WINDOW GLASS ADJUSTMENT

1. Remove the front door trim panel.







2. Loosen, but do not remove, the window regulator bracket upper nuts.







3. Raise the front door window glass to the full up position.
- Tighten the nuts to 12 Nm (9 lb-ft).







4. Loosen, but do not remove, the rear glass channel bolt.
5. Lower the front door window glass partway, to allow adjustment.







6. Move the front door window glass to the rearward position.
- Tighten the bolt to 12 Nm (9 lb-ft).