Seat - Rear, Bench

Seat - Rear, Bench

Removal and Installation

1. Insert an appropriate tool into the slot in the detachable anchor and lift upward, disengaging the detachable anchor tongue from the detachable anchor.







2. NOTE: Right seat latch handle shown, left seat latch handle similar.

Remove the bench seat.
1 Pull the right and left handles rearward to release the seat from the seat mounting bracket.
2 Disengage the latch rod hook ends from the seat mounting bracket and remove the seat.

3. To install, reverse the removal procedure.
- Make sure the seat stanchions and the latch rod hook ends are completely engaged and locked into the seat mounting bracket.
- Make sure the safety belt is not twisted before installing the detachable anchor tongue to the detachable anchor.
- Make sure the safety belts and buckles are accessible to the occupants after installation