Oil Life Start Value - Message Center Cluster

OIL LIFE START VALUE - MESSAGE CENTER CLUSTER

NOTE:
- The oil life start value is used to increase or decrease the starting point of the oil life. The value can be changed back to the maximum of approximately 8,000 km (5,000 miles) if the value was previously changed or lowered by 10% increments down to 10%.
- The XX's in the message center displays below represent a numeric value. For example, the message center may display OIL LIFE = 80%.

1. Press and release the SETUP button until the message center displays OIL LIFE = XXX% HOLD RESET = NEW.
2. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO 100%.

3. NOTE: The oil life start value can be lowered from 100% to 10% in 10% increments then the value starts again at 100%.

Press the RESET button once for each 10% reduction below the default 100% until the message center displays OIL LIFE SET TO XX%.

4. Press and release the SETUP button to exit the procedure.